Typical components of a Flare System include: Pressure safety valves, blowdown and manual vent valves, pressure control valves, tailpipes, flare knockout drums (KODs) and pumps, emergency gas purge, Flare risers, tips and associated hardware (fuel gas, ignition, steam or air), Associated monitoring and safety systems including infrared monitors.
- About
- Services
- Process Safety Management
- Technical Risk
- Fire and Explosion Risk Assessment (FERA)
- Escape, Evacuation and Rescue Analysis (EERA)
- Emergency System Survivability Analysis (ESSA)
- Failure Mode Effects and Criticality Analysis (FMECA Analysis)
- Flare Radiation and Vent Dispersion Study (FLARE Study)
- Gas Dispersion Modelling (In 2D and 3D Forms)
- Quantitative Risk Assessment (QRA)
- Temporary Refuge Impairment Analysis (TRIA)
- Non-Hydrocarbon Hazard Analysis (NHHA)
- Loss Prevention
- Operational Safety
- Process Safety Consulting
- Training
- Portfolio
- Software Solutions
- Library
- Contact